Tag: New Construction Non-Residential

 

What is coming for Title 24 – 2016 Residential Energy Standards Code?

2016 Energy Code - DuctTesters

Title 24 Energy Code Standards are MANDATED for every residential project built, making a minimum energy efficient code all buildings must abide to, in order to get a final permit.  You are hearing more about the energy code because: it becomes more stringent every three years, third party testers are now required to ensure compliance is met, and building inspectors are enforcing it.  About every three years, the energy code standards change in an effort to get every new building to eventually become net zero (building produces as much energy as it uses making the building self-sustainable) or as close as  possible.  The government’s goal is that all new residential buildings will be net zero ready in 2020 and all new commercial buildings in 2030. This is also why some  products you installed in one development a year ago, may not qualify to be installed in next year’s project.  Every building and every project are different, the code allows for some items to have a tradeoff in order to meet compliance, different climate zones dictate and prompt different energy efficient compliance minimums, and building orientation all could have an effect on a project’s energy calculations.

2016 Energy Standard Code will officially go in to effect for projects permitted on or after January 1, 2017.

New for the 2016 Residential Energy Standards…

LIGHTING

  • All Occupant Sensing controllers have max timer of 20 minutes
  • All Installed luminaires shall be high efficacy Table 150.0 A
  • Count of Blank Electrical boxes more than 5 ft. above floor limited to amount of bedrooms. Must Controlled by dimmer of Vacancy sensor.
  • Recessed Lights cannot have screw based lamps.
  • All Recessed Lighting, LED GU-24 socket, and any screw based lamps still need to be High Efficacy, but must a CEC certified product AND controlled by Dimmer or Vacancy Sensor (Except hallways and closets >70sf for controls)
  • Bathrooms, Garages, Laundry, Utility Rooms at least 1 light is controlled by Vacancy Sensors

2016 Energy Code Compliance Lighting Standards

 

CEILINGS AND RAFTER ROOF

  • Option A: Insulation above deck (R8 No Air Space or R6 with air space) AND R38 at Ceiling and Radiant Barrier
  • Option B: Insulation below deck (R18 No Air Space or R13 with Air Space) AND R38 at Ceiling and NO Radiant Barrier
  • Option C: R38 at Ceiling and Radiant Barrier and Ducts In conditioned Space.

WALL INSULATION

  • Being compared to a U-Factor of 0.050 (no option without rigid foam meets this)

HVAC

  • Duct Leakage reduced to 5% (from 6%)
  • Duct Insulation increased to R8 with HPA OR R6 with Option C Attic
  • Liquid Line Filter Drier installed if Manufacturer’s instructions call for it.

HOT WATER

  • Option 1: Tankless water heater with 200kBtu
  • Option 2: Storage Tank with 105kBtu AND QII Insulation AND Compact Hot Water Design OR All Hot water Pipe Insulation

DUCTTESTERS – 2016 RESIDENTIAL ENERGY CODE SUMMARY SHEET

ENERGY CODE ACE’S OFFICIAL 2016 SUMMARY SHEET FOR RESIDENTIAL

2016 Building Energy Efficiency Standards FREQUENTLY ASKED QUESTIONS by the CEC

#Title24, #EnergyCodeStandards, #CAEnergyCode, #EnergyConsulting, #CAEnergyConsultant, #T24, #LosAngelesEnergyConsultant, #SacramentoEnergyConsultant, #OrangeCountyEnergyConsultant, #InlandEmpireEnergyConsultant, #VenturaEnergyConsultant, #SantaBarbaraEnergyConsultant

Facebooktwittergoogle_plusredditpinterestlinkedinmail

NAHB IBS Show 2016 – Las Vegas, NV

DuctTesters attended the 2016 NAHB International Builders’ Show (IBS) in Las Vegas.  This convention is the nation’s largest annual residential housing construction trade event.  IBS and the Kitchen and Bath Industry Show (KBIS) co-located to create a Design & Construction Week®.   This year, the International Window Coverings Expo (IWCE) and the International Surface Event (TISE) also joined in.  This massive event is said to have brought in over 110,000 builders, general contractors, remodelers, designers, flooring professionals, HVAC contractors, insulation contractors, energy efficient manufactures, and other product specifiers from around the globe.

DuctTesters was proud to support the event.  There were over 2,000 exhibitor brands, new innovative ideas and products, a number of educational seminars and tons of networking opportunities.  It was nice seeing the home building industry’s enthusiasm returning.   Here are a few fun photos from the event.

#IBSVegas, #IBSShow

IBS Show in Las Vegas 2016 NAHB IBS 2016 PWB NAHB IBS 2016 PWB Event3 NAHB IBS 2016 PWB Event1 Mike Holms Sr. and Jr.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

HOME ENERGY ANALYSIS

A home energy audit is the first step in making your home more efficient. An audit can help you assess how much energy your home uses and evaluate what measures you can take to improve efficiency. A visit from one of our Certified Existing Home Raters will allow you to find out how your home is currently performing. During the visit we collect information about your homes construction and use specialized equipment to analyze the performance of the HVAC and the house as a whole. An infrared camera is used to reveal hard to detect air infiltration, missing insulation, and is a valuable tool for finding the cause of your homes discomfort. Then our certified energy analyst will use a state certified program to analyze the performance of your home and show you how the proposed upgrades will affect your homes overall efficiency, reduce your utility bills, and improve your indoor comfort.

Schedule Your Home Energy Assessment!

Facebooktwittergoogle_plusredditpinterestlinkedinmail