Tag: Mechanical Drawings

 

DuctTesters Presenting at AIA OC Event

DuctTesters is proud to be presenting “New Energy Code Standards Are Here, Are You Ready?” at the AIA Orange County Event on March 21 from 12:00 pm – 1:00 pm at the AIAOC Office (4100 Birch Street, Suite 300, Newport Beach,, CA 92660). Course Summary: Discussing the new Energy Code Standards including: Mandatory, Performance, and Prescriptive Measures, Time Dependent Valuation (TDV), High Efficacy Lighting, High Performance Walls (HPW), High Performance Attics (HPA), PV/Solar Credit, Hot Water Heater Changes, Basic Understanding of some of the Energy Points/Costs, etc. Attendees who are current AIA Members can receive AIA CEC for attending this event.

Learning Objectives Attendees will discuss and learn:

1. The difference between Mandatory, Prescriptive and Performance Methods

2. What is new in the 2016 Energy Code

3. High-Performance Attics and High-Performance Walls

4. Hot Water Heaters, Solar, and seeing what energy code points are potentially the most cost effective

Find out more: http://aiaorangecounty.org/event/energy-code-update/

Facebooktwittergoogle_plusredditpinterestlinkedinmail

DuctTesters Attends PCBC 2016

PCBC Energy ConsultantOnce again DuctTesters attended PCBC (Pacific Coast Builder Convention).  This year’s trade show was held on Wednesday, June 22 and Thursday, June 23 in San Francisco.  PCBC is attended by home builders, developers, architects, building scientists, energy consultants, lenders, investors, marketers and product manufacturers from a range of housing forms including single-family, multifamily, mixed-use, 50+ and resort development.  

There is an exhibit floor compiled of extensive building industry products and service solutions, along with a number of educational conferences and forums.  There are countless networking opportunities throughout the convention days which include breakfast meetings, lunch meetings, cocktail hours, lounge retreats, dinner events, evening events, and much more.  If you are attending and interested in meeting, please let us know and we can set up a time to see you there.

In 2015, there were close to 9,000 attendees of which:    

PCBC Attendance 2015

Below are photos from the 2016 show in San Francisco.  Please note that in no way are we promoting any products or companies.  These are photos taken at the event, walking the floor, attending seminars, etc.  If you would like us to add any other photos you took at the event, we would be more than happy to.  Please email them to info@ducttesters.com.

 

Facebooktwittergoogle_plusredditpinterestlinkedinmail

2016 Tax Credits You Should Know About

Single-Family, Multi-Family, Commercial, and Affordable “Builders, Developers, and Homeowners”: Below is a brief overview of some important tax credits/deductions you should know about for 2016. They are Section 45L: Builder Energy Efficient Home Federal Tax Credit, 25C: Nonbusiness Energy Property Credit, 25D: Residential Energy Efficient Property Credit, 179D: Commercial (and Multi-Family built under Commercial Code) Energy Efficient Deduction, 179 Equipment and/or Software Full Deductions, and LIHTC: Low Income Housing Tax Credit Minimum.  


45L: Builder Energy Efficient Home Federal Tax Credit. Builders and Developers, Single Family and Multi-Family (up to three stories), can collect $2,000 of tax credit for each new dwelling unit. Builders and Developers that exceed the heating and cooling 2006 IECC energy standards by 50% are eligible.  Most California builders and developers already qualify due to the CA Energy Efficient Standards already in place.  Find out more here: http://ducttesters.com/2015/12/collecttaxcredit/

25C: The Non-business Energy Property Credit. This is ideal for remodelers. Make home improvements using qualified energy efficient products and collect a 10% tax credit subject to a $500 lifetime cap.  Upgraded products include: exterior windows, exterior doors, adding insulation, and certain roofs (installation not included). There is also a credit (including installation) for select heating and air-conditioning systems, hot water heaters, biomass fuel stoves, and oil hot water heaters.  A stipulation to the $500 credit limitation is that only $200 may be used for windows, and all improvements must be made to the taxpayer’s primary residence. https://www.irs.gov/Credits-&-Deductions/Individuals/Nonbusiness-Energy-Property-Credit

25D: Residential Energy Efficient Property Credit. Install qualified energy efficient property of: solar panels, wind turbines, geothermal heat pumps and fuel cells…in new or existing homes, get 30% of the expenditures back in tax credit.  All must be placed in service on or before December 31, 2016. The credit for fuel cell expenditures made is limited to $500 for each one-half kilowatt of capacity of the property; the amounts of the other qualified expenditures eligible for the credit are not limited. https://www.irs.gov/Credits-&-Deductions/Individuals/Residential-Energy-Efficient-Property-Credit

179D: Commercial Buildings (and Multifamily built under Commercial Code) Energy Efficient Deduction.  Builders that surpass the minimum energy efficient standards in new construction and renovation receive a deduction.  The more energy efficient the building is, the larger the deduction the builder receives (up to $1.80 per square foot).  The energy efficiency elements evaluated in order to obtain this deduction are:  the building envelope, the HVAC system, and the lighting. The taxpayer must obtain a third party certification to verify the energy savings are legitimate.  This tax incentive, supports and rewards building owners who want to lower operating costs and increase operating profits. https://www.irs.gov/Businesses/Small-Businesses-&-Self-Employed/Commercial-Property-Owners-and-Leaseholders-Qualify-for-Energy-Efficiency-Tax-Deduction

179: Equipment and/or Software Full Deductions instead of taking depreciation deductions.  This renewed section of the tax code allows businesses to deduct the FULL purchase price of qualifying equipment and/or software “new or used but new to the business” purchased or leased during the year – now up to $500,000 but capping out over time when the deductions reach $2,000,000.  A business can write off equipment through depreciation over a few years, Section 179 of the tax code allows businesses to deduct the full amount.   This tax incentive was created to encourage businesses to buy equipment/software and invest in themselves.  Under this section, there is also a renewed 50% bonus depreciation “for new equipment only” but the percentage will phase down to 40% in 2018 and to 30% in 2019.  The bonus depreciation is useful to businesses that spend more than $2,000,000 and businesses with a net loss who can also qualify and carry forward the loss. https://www.irs.gov/publications/p946/ch02.html

LIHTC:  Extension of Low Income Housing Tax Credit Minimum Set at 9%.  This renewed bill extends the minimum 9% low-income housing tax credit (for non-federally subsidized buildings) which is used for financing new construction and substantial rehabilitation.  Keeping the 9% minimum permanent for federal housing credit, it helps provide affordable housing developers more certainty for future project planning.  When the credit rates decline there is less equity available for the affordable developments. http://nahbnow.com/2015/12/omnibus-bill-huge-wins-for-affordable-housing/

Repost or Download as PDF or JPG

Section 45L, 25C, 25D, 179D, 179, and LIHTC.


 

Facebooktwittergoogle_plusredditpinterestlinkedinmail